metal planetary gearbox wholesale is a power transmission mechanism, which mainly uses the speed converter of the gear to slow down the rotation number of the motor to the desired rotation number and get a larger torque mechanism. So, what are the disassembly steps of metal planetary gearbox wholesale?

1. Remove the lubricating oil pump.

2. Twist the oil plug at the bottom of the boot seat and put out the lubricating oil.

3, loosen the fastening bolts, separate the base part and the needle gear part.

4. Take out the shaft pin sleeve.

5. Remove the stop pad at the front end of the rotor arm and take out the cycloidal gear II.

6. Take out the boom and its bearing assembly.

7. Take out the isolation ring and cycloidal gear Ⅰ.

8, when disassembling cycloidal gear, remember the position of its cross section marking font.

The above is the metal planetary gearbox wholesale disassembly steps, I hope to help you.

metal planetary gearbox wholesale https://www.dydzmotor.com/72mm-metal-planetary-gearbox.html